Re: [DML] leaky injector

From: "Walter Coe" <Whalt@xxxx>
Date: Wed, 13 Feb 2002 15:21:57 -0500

My ideas on your problem:

Perhaps the leak is coming from the banjo fitting where it connects to the
fuel line.

Also consider that maybe you didn't torque the hollow bolt enough. Did you
use a torque wrench? That is the only way to be sure it is right.

Walt Tampa, FL

Follow-Ups:
- more questions
  - From: James LaLonde
- couple of questions
  - From: James LaLonde
- wide accent stripe
  - From: James LaLonde

References:
- fuel pressure tester
  - From: Noah
- Re: [DML] fuel pressure tester
  - From: Dave Sontos
- Control Pressure Regulator/Twin Turbos [long]
  - From: Martin Gutkowski
- Re: [DML] Control Pressure Regulator/Twin Turbos [long]
  - From: Dave Sontos
- Re: [DML] Control Pressure Regulator/Twin Turbos [long]
  - From: Martin Gutkowski
- Re: [DML] Control Pressure Regulator/Twin Turbos [long]
  - From: Dave Sontos
- [DML] leaky injector
  - From: Payne

Prev by Date: Re: [DML] New Speaker Install...Save original car
Next by Date: RE: [DML] New Speaker Install...Save original car
Previous by thread: [DML] leaky injector
Next by thread: wide accent stripe
Index(es):
- Date
- Thread

Back to the Home of PROJECT VIXEN

Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive DMCNews Mailing List Archive DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated