[DML] Re: idle fluctuations
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: idle fluctuations

What do I do if my throttle arm isn't returning all the way? The spring is already on the second setting. I tried lubing the linkage... still the throttle will stick at about 1100-1400 rpm's after the car has been driven. I can revv the engine and it will get enough momentum to make the throttle arm return all the way. What should I do? Is a new throttle spool spring an option? Obviously I need more tension.

Louie Golden
VIN 5252 Charlotte, NC

--- "David Teitelbaum" <jtrealty@xxxx> wrote:
A couple of quick things to check:
a vacuum hose may have fallen off or developed a leak
The plug for the mixture screw is missing
bad ignition wires
sticking throttle cable not allowing the idle micro to "set"
Dirty, fouled spark plug
leaking cold start valve
David Teitelbaum
vin 10757

Pre-order the updated second edition of "DeLorean: Stainless Steel Illusion" now! Details <a href="http://www.stainless-steel-illusion.com"; target="_blank">here!</a>

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive