[DML] Re: Heat shield / Fuel Pump - Radiator

["Stian Birkeland" <dmc_norway@xxxx>]

How many heatshields are there on the DeLorean anyway??? Where are they 
located???

In an old DeLorean World ad for Bauerle Automotive in Ohio, you could also 
buy a non-delorean after-market heatshield to place in front of the car. 
This heatshield was meant to protect the fuelpump from the warm air coming 
from the radiator. This was supposed to help the fuelpump operation, so that 
the fuelpump wouldn't develop a high noise during operation. Is there any 
truth in this???

If this is true, is this particular heatshield still available?

> From Bauerle? DMC Houston? PJ Grady? D1? Or is it not produced anymore?

Any help would be appreciated.

Stian Birkeland
NORWAY


> From: "DMC Joe" <DMCJOE@xxxx>
> Reply-To: dmcnews@xxxxxxxxxxx
> To: <dmcnews@xxxxxxxxxxx>
> Subject: [DML] Re: Heat shields.
> Date: Sat, 13 Nov 1999 14:46:38 -0500
>
> Driving the car without a muffler heatshield will cause premature failure
> of the drive belts, pulley bearings, front engine crankshaft seal, camcover
> seals, and the wiring harness. The heatshield supplied by PJ Grady, and DMC
> Houston are factory spec. and will fit perfectly.
>
> DMC Joe / DeLorean Services / <dmcjoe@xxxx>
> Web Site: <http://www.deloreanservices.com>
>
> ----------
> > From: Sjaeger01@xxxx
> > To: dmcnews@xxxxxxxxxxx
> > Subject: [DML] Heat shields.
> > Date: Friday, November 12, 1999 12:08 AM
> >
> > I need to replace the heat shields on my Delorean, they are falling
> apart. I
> > was just curious what other owners have done. Did you just replace them
> with
> > shields available from the Delorean parts suppliers, replaced them with
> > something else or not replace that at all? Is there other options?
> >
> > Thanks
> > Steve
> >
> > ------------------------------------------------------------------------
> > Before posting messages or replies, see the posting policy rules at:
> > www.dmcnews.com/Admin/rules.html
> >
> > To address comments privately to the moderating team, please address:
> > moderator@xxxx
> >
> >
> > eGroups.com home: http://www.egroups.com/group/dmcnews
> > http://www.egroups.com - Simplifying group communications
> >
> >
> >
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>
> eGroups.com home: http://www.egroups.com/group/dmcnews
> http://www.egroups.com - Simplifying group communications

______________________________________________________