[DMCForum] Re: Tie rod ends(was Stuborn wheel) is complete
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Tie rod ends(was Stuborn wheel) is complete

I got the tie rods ends replaced with in a matter of minutes after
Mike told me that they are left hand and right hand thread. I didn't
know that yesturday so now I have two brand new tie rod ends on my
car and now I am trying to get the sway bar back on. I know but the
cobwebs keep getting in my eyes so I am taking a lunch break.

I'm so close to getting her on the road I can see the blue lights
now :)


--- In DMCForum@xxxxxxxxxxxxxxx, "Josh Porter" <joshp1986@xxxx>
> I tried to undo the lock nut but it will not budge. I think what
> problem is, is that I am not strong enough. Crazy sounding I know
> but I worked on for almost two hours last night trying new ideas
> how to get it off and nothing. I'm going to spend all day todeay
> working on it and that is the first thing on my list is to get
> babies off of there.
> Josh
> 10989
> --- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx>
> wrote:
> >
> > Have you undone the locknut first? The end is locked into place
> with a
> > locknut that has to be cracked off before you can undo the end
> the rod.
> >
> > Martin
> >
> > Josh Porter wrote:
> >
> > > Ok I got the wheel off and I have been trying to get the tie
> end
> > > off for the past hour or however long it has been since the
> reply to
> > > my post. Other than a bloddy finger where my hand slipped off
> and hit
> > > the sway bar I have no results. I sprayed PB blaster on it a
> times
> > > and let it soak for around 15 mins. I tried twisting it both
> ways and
> > > nothing. I'm trying to get the end off of the rod, the whole
> thing
> > > just fell out of the hub assembly.
> > >
> > > Am I missing something or is it just on there good?
> > >
> > > Josh
> > > 10989
> >


Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive