[DMCForum] Re: Tie rod ends(was Stuborn wheel)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Tie rod ends(was Stuborn wheel)

I tried to undo the lock nut but it will not budge. I think what my
problem is, is that I am not strong enough. Crazy sounding I know
but I worked on for almost two hours last night trying new ideas on
how to get it off and nothing. I'm going to spend all day todeay
working on it and that is the first thing on my list is to get those
babies off of there.


--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx>
> Have you undone the locknut first? The end is locked into place
with a
> locknut that has to be cracked off before you can undo the end off
the rod.
> Martin
> Josh Porter wrote:
> > Ok I got the wheel off and I have been trying to get the tie rod
> > off for the past hour or however long it has been since the
reply to
> > my post. Other than a bloddy finger where my hand slipped off
and hit
> > the sway bar I have no results. I sprayed PB blaster on it a few
> > and let it soak for around 15 mins. I tried twisting it both
ways and
> > nothing. I'm trying to get the end off of the rod, the whole
> > just fell out of the hub assembly.
> >
> > Am I missing something or is it just on there good?
> >
> > Josh
> > 10989

Dmc Dml Dmc fz10
Dmc fz1s Delorean part Dml forte


Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive