RE: [DMCForum] Need a bearing..
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Need a bearing..



A spacer between the crank and the bearing should be quick and easy to turn
on a lathe.

-----Original Message-----
From: Marc Levy [mailto:malevy_nj@xxxxxxxxx]
Sent: Monday, April 04, 2005 4:41 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] Need a bearing..


Stack?  I don't think that is possible for this
application.

The is for the pilot bearing, and there is about 1/2
inch gap between the end of the input shaft and the
crankshaft.

I am left with 2 other options..  Make a hub to bring
the bearing out to reach the input shaft, or have the
input shaft extended (or make a new one).

Both seem like expensive options.  :(

Thanks for checking Greg.. I appreciate it!


--- timnagin <timnagin@xxxxxxxxxxxxxx> wrote:
>
> I called a few places here that specialize in this
> and they didn't have
> anything that wide.  Several suggested stacking
> three 17 x 35 x 10 together
> and using a bronze bushing to fill in some of that
> space, if you can.  The
> largest they could find was a 17 x 35 x 14.
>
> Greg
>


           
__________________________________
Yahoo! Messenger
Show us what our next emoticon should look like. Join the fun.
http://www.advision.webevents.yahoo.com/emoticontest


  _____ 

Yahoo! Groups Links


*      To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
 

*      To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
<mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
 

*      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated