AW: [DMCForum] Angle Torque... what the hell?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [DMCForum] Angle Torque... what the hell?



I still don't get your problem. I've done this stuff on other cars before.
Just do it. What's your problem ? Don't you know that a full turn has 360
degrees ?

Maybe angle torque is a wrong name as torque is always specified in Nm
(Newton Meter or for the non metric users - something with feet and weight
!). Accept the name as it describes it pretty good.

or wanna calculate something ?
what's the angle ? 117° ?  117/360*(flank lead ) = length that your bolts
will
be stretched. too complicated ? exactly ! therefore they tell you the
angle
as you can draw it on a sheet of paper, lay it over the bolt and turn the
nut .....





I should clarify my last question... Has anyone applied the angle torque
to
their head bolts?

Rich, how about you?


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get a FREE REFINANCE QUOTE - click here!
http://us.click.yahoo.com/nHYuCC/ca0FAA/ySSFAA/HliolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated