360 degrees? is that F, C, R, or K? And I dont think he wants to heat the bolt I think he wants to make sure the bolt is tight enough. I luv to cause problems :) Andrei ----- Original Message ----- From: "Elvis Nocita" <elvisnocita@xxxxxx> To: <DMCForum@xxxxxxxxxxxxxxx> Sent: Tuesday, July 22, 2003 3:33 PM Subject: AW: [DMCForum] Angle Torque... what the hell? > I still don't get your problem. I've done this stuff on other cars before. > Just do it. What's your problem ? Don't you know that a full turn has 360 > degrees ? > > Maybe angle torque is a wrong name as torque is always specified in Nm > (Newton Meter or for the non metric users - something with feet and weight > !). Accept the name as it describes it pretty good. > > or wanna calculate something ? > what's the angle ? 117° ? 117/360*(flank lead ) = length that your bolts > will > be stretched. too complicated ? exactly ! therefore they tell you the angle > as you can draw it on a sheet of paper, lay it over the bolt and turn the > nut ..... > > > > > > I should clarify my last question... Has anyone applied the angle torque to > their head bolts? > > Rich, how about you? > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > ------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511 http://us.click.yahoo.com/sOykFB/k9VGAA/ySSFAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN