RE: [DMCForum] Angle Torque... what the hell?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Angle Torque... what the hell?



Absolutely correct! It's sad that you can explain what I was trying to say
better than I could :).

> -----Original Message-----
> From: timnagin [mailto:timnagin@xxxxxxxxxxxxxx]
> Sent: Tuesday, July 22, 2003 3:21 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: RE: [DMCForum] Angle Torque... what the hell?
> 
> Yes, the concept is simple.  I think what he was trying to find out is
WHY
> this method was recommended as opposed to just torquing to a specific
> numerical value.  Right Travis?
> 
> Greg
> 
> -----Original Message-----
> From: Elvis Nocita [mailto:elvisnocita@xxxxxx]
> Sent: Tuesday, July 22, 2003 3:33 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: AW: [DMCForum] Angle Torque... what the hell?
> 
> 
> I still don't get your problem. I've done this stuff on other cars
before.
> Just do it. What's your problem ? Don't you know that a full turn has
360
> degrees ?
> 
> Maybe angle torque is a wrong name as torque is always specified in Nm
> (Newton Meter or for the non metric users - something with feet and
weight
> !). Accept the name as it describes it pretty good.
> 
> or wanna calculate something ?
> what's the angle ? 117° ?  117/360*(flank lead ) = length that your
bolts
> will
> be stretched. too complicated ? exactly ! therefore they tell you the
> angle
> as you can draw it on a sheet of paper, lay it over the bolt and turn
the
> nut .....
> 
> 
> 
> 
> 
> I should clarify my last question... Has anyone applied the angle torque
> to
> their head bolts?
> 
> Rich, how about you?
> 
> 
> 
> To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=170512
6215:HM/A=1663535/R=0/SIG=11ps6rfef/*http://www.ediets.com/start.cfm?code=
30504&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3551198.4824677.1261774/D=egroupm
ail/S=:HM/A=1663535/rand=536686986> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated