>> Does anybody know how to remove the air inlets at the back? >No experience, but I THINK it slots in from the outside and is glued. It actually slots in from the inside but I will try to heat the glue tomorrow and hope it will move then. >> Second question: where are the 3 wires from the power antenna going >> on 82 and 83 models? My radio works. But the antenna is not moving. > >The wires run from the antenna through the pontoon to the relay >behind the drivers seat (under the wooden panel). >From there one wire is grounded, one goes to the fuse-area and >is usually connected to the circuitbreaker for the locks and >the third one (white I think) comes from the radio. >Check that wire to have power on it with the radio on... Thank you. So I think I will have to cut the wires to check since I couldnt find the end of the wires at the relay compartment? >> Third question: The housing of my LH outside mirror is a little loose. >The housing is secured to the body with a couple of screws from the inside. I can only see one big bolt going from the housing to the base and it doesn't look like a screw? >They're hidden behind the A-pillar trim. >> And how do I remove the mirrorglass itself? >> I hope it's not glued-on? >Well... It IS :( :-( Thanks for your response! Ryan Yahoo! Groups Sponsor <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 6215:HM/A=1564415/R=0/*http://www.netflix.com/Default?mqso=60164784&partid =3170658> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ail/S=:HM/A=1564415/rand=224288645> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN