Even with a photo, it can be hard to say what is wrong. Example: Ken's recent question about his door. If the top of the door is rubbing on the edge of the T-panel, this is kinda normal. It happens because the T-panel settles (padding compresses with age). If you put something under the panel to raise it a bit then it doesn't rub. As for the lift strut being visible... is the lip of the door much higher than the T-panel? Normally there is supposed to be a gasket glued to the quarter panel/T-panel. Is the door fitting so loose that you can see around this gasket? Walt ------------------------ Yahoo! Groups Sponsor ---------------------~--> New Yahoo! Mail Plus. More flexibility. More control. More power. Get POP access, more storage, more filters, and more. http://us.click.yahoo.com/Hcb0iA/P.iFAA/46VHAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN