[DML] Re: Broken torsion bar
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Broken torsion bar

For those of you that worry about these things I have a possible
solution. All of the torsion bars I have seen that failed usually
break where they pass by the rear hinge. My guess is that the bar rubs
on the hinge creating scratches (read stress risers) that lead to the
eventual breakage. Cut up some thick rubber (like a piece of inner
tube) into a small piece about 1" by 2". Open the door, pull the
torsion bar with your fingers away from the rear hinge and slip the
rubber in between. YOu can use a dab of glue if the bar is far away
and won't hold the rubber in place. Maybe it won't help but it can't hurt!
Another point, the driver's side bar has one end hex and the passenger
side is square. I have seen bars where the splines are messed up but I
have been able to use them with some careful filing. Buying a used
torsion bar can be a leap of faith. You won't know it is good by
visual examination. Only if it can take a load and not break is the
ultimate test. Hard to part with a lot of money and find out it was
dropped or scratched or just damaged in shipping. I don't care how
good a welder is, the process of welding (high temperature) will
affect the cyro treat in the ajoining area to the weld making it
weaker. The weld may not break but how about the area next to the
weld? I do not know of anyone that can say they have a welded up bar
and it is still good. If there are please come forward and let us know
how it was done or at least who did it.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle_dmc@...> wrote:
> Actually there is about 45 degrees of twist in the bar with the door 
> wide open. Still a pretty good pent up hunk of energy. 
> Generally though a bar will fail with the door shut since it's more 
> twisted at that point. I have seen a bar fail with the door 1/2 open, 
> but it was a welded-up bar. 
> Dave S
> --- In dmcnews@xxxxxxxxxxxxxxx, "cbl1739" <cbl302@> wrote:
> >
> > --- In dmcnews@xxxxxxxxxxxxxxx, "Ryan Wright" <ryanpwright@> wrote:
> > >
> > > > If so, why all this talk about welding them? Just buy one. I'm 
> not
> > > sure I'd want to be around an open DeLorean door with a welded 
> torsion
> > > bar.
> > > 
> > > -Ryan
> > >
> > Actually Ryan,when the door is open,the torsion bar is NOT under 
> > load,so the chances of getting zinged by a piece of the torsion bar 
> is 
> > rather slim,that is why you always hear of torsion bars snapping 
> with

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive