[DML] Minimum rotor thickness?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Minimum rotor thickness?



I just took my D to a mechanic for the mandatory state inspection so I
can get the vehicle registered, and it failed on a couple points.  One
was that the rotors are warped, and I'm not sure if I need to get new
ones or if the existing ones can be re-machined - does anyone know
what the minimum thickness should be?  I have my parts manual and shop
manual but all that tells me is what the diameter is.

Thanks in advance, everyone here has been so helpful.

Bill
06976







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated