Re: [DML] Minimum rotor thickness?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Minimum rotor thickness?



If memory serves me, not well by the way, I believe it's 7mm.  I know it's 
printed on the rotors if I'm wrong about the 7mm.  I just had mine turned 
for the last time because I'm down to minimums now.

Lingo
#2034


----- Original Message ----- 
From: "o0shoryuken0o" <dmc06976@xxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, October 24, 2005 1:12 PM
Subject: [DML] Minimum rotor thickness?


> does anyone know
> what the minimum thickness should be? 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated