[DML] Intake Manifold Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Intake Manifold Bolts

I am gettiong closer to accessing the Valley of Death, and am a little 
nervous about it.  One manifold bolt stands in my path.  If looking at 
the engine from the rear of the car, of the four bolts holding down 
the manifold, its the upper left bolt, nearest to the brass tube that 
runs through this area.  I took the tube out, and the spark plug 
wire.  The bolt head is under a curved section  of manifold, 
preventing my 11 mm socket head from sitting squarely on it.  Looks 
like I need to get an 11 mm wrench tommorrow morning.  Do I need 
anything special to get this bolt off?  I sprayed with PB Blaster 
tonight as well.

Thanks for any experienced advice.


vin 10944

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive