RE: [DML] Intake Manifold Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Intake Manifold Bolts

I used a universal joint adaptor on my socket and had no problems with any
of the 4, on either of two different engines***.  Pulling the manifold is
easier than it may seem...

Now - I don't have it back ON yet mind you...


*** 	By the way - this job intimidated me a little, so I took an
afternoon and went down to the local pick your part yard and found an 84
volvo with a B28f engine.  They didn't charge me a dime to spend an hour or
two pulling parts off their engine as a rehearsal for mine.  I did actually
purchase a few of the parts I pulled, but there was greater value in
practicing on an engine that nobody loved.

-----Original Message-----
From: sweetp01569
I am getting closer to accessing the Valley of Death, and am a little 
nervous about it.  

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive