[DML] Re: Need advise
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Need advise

You might find this a little interesting:  During one of our club
events, somone brought a laser thermometer and measured the temp on my
aluminum bottle vs. the stainless.  The aluminum was about 20 degrees
cooler and I had arrived about the same time as the other person with
the stainless bottle.

The DMCH fuel sender works, but in my opinion, isn't EXACTLY correct. 
 But at least it's better than what I had before.


On 8/8/05, gremishe <gremishe@xxxxxxx> wrote:
> Hi,
> I am planning to do few updates and need your advice before buying the
> parts.
> 1. 
> Replacing Coolant Bottle.
> There are few choices here: Houston sells metal bottle and both PJ
> Grady and Specialauto.com sell Stainless. The price is almost the same
> for all of them. Which one is better? Which looks better?
> 2.
> Replacing Fuel Gauge Sending Unit.
> Houston sells one for about $99 and TankZilla cost $149.99. 
> This is 50% price difference. Is TankZilla that much better? Is it
> worth it?
> 3.
> I need to replace a rubber/foam strips that run between Sunshade
> Louvre and the body on each side. I search the part catalog and I
> think I found it. Parts #108720 and #108721 "SUPPORT BUFFER". Can
> someone confirm this?
> Thank you for your help,
> Gleb
> 3406

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive