Re: Stand corrected: grounding door ajar indicator through lever light

["content22207" <brobertson@xxxx>]

I stand corrected. Obviously if indicator can ground itself through
hood or engine compartment lights, can do so through front lever light
too. Don't know where brain was.

Doors will have to be closed, accessory relay will have to be
energized, and fuse 12 will have to be dead. Odd circumstances, but
definitely possible.

Of course lights themselves won't illuminate this way.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, Jan van de Wouw <delorean@xxxx> wrote:
> --- In dmcnews, Bill wrote:
> 
> > If Patrick flipping front light I am correct (that's third
> > diode right above delay module in wiring diagram).
> 
> No you are NOT; This time with a green line...
> <http://members.home.nl/delorean/doorajar_front.gif>
> 
> The purpose of the diode you mention is to keep the
> door-lights separate from the interior lights,
> so the delay only delays the interiors.
> The diode is conected to BOTH lights, there's wiring
> running "down" to the rear light past the delay,
> the "loop" to its' left in the diagram.
>