[DML] Re: DeLorean steering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: DeLorean steering



Thanks Dave.

Could also worn sway bar bushings cause this by allowing things to 
move that shouldn't be allowed to move?

I'm prepared for bad news. We'll see how bad it is on Friday when I 
have it aligned after I install the new tie-rod ends.

Thanks,

Rich




--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle@xxxx> wrote:
> Not adjustable. If your view is accurate you either have worn 
> suspension bushings or a bent/rusty frame. Or both. 
> 
> --Toe is set by the tie rod ends. 
> --Caster (kingpin angle) is set by the sway bar and is not really 
> adjustable (expect by maybe bending the sway bar!)
> --Camber is set by the frame construction and is not adjustable. 
You 
> seem to be demonstrating negative camber. Good for an autocross 
car, 
> bad for tire wear. 
> 
> Tire wear as you describe could be caused by any of these - an 
> alignment is your best bet but be prepared to find some bad parts. 
> The only adjustment in the front that the alignment guy will be 
able 
> to do will be toe. 
> 
> Dave S
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote:
> > Someone please explain DeLorean steering geometry to me. I am 
> > familiar with some terms: Toe, caster and camber.
> > 
> > Due to the wear on the inner edges of my tires, I suspect they 
are 
> > pointed like this:   //  \\  (If you're looking at the car head-
on)
> > 
> > Instead of: ||   ||  (Ditto)
> > 
> > Which of the above 3 is responsible for this, and is it 
adjustable 
> in 
> > the DeLorean? On the front end, are any of the 3 NOT adjustable?
> > 
> > My new tie-rod ends will be here soon and I'm going to take it to 
> the 
> > alignment joint up the road Friday morning. Before I do, I want 
to 
> > know if I have something else that's really wrong. I hope I 
don't. 
> > How bad could it be? It took several months of driving for the 
> > abnormal wear pattern to even show up.
> > 
> > I have read the tech section of DMC news and a few other places 
and 
> > find the explanations lacking. 
> > 
> > Thanks,
> > 
> > Rich A.
> > #5335



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/dmcnews/

To unsubscribe from this group, send an email to:
 dmcnews-unsubscribe@xxxxxxxxxxxxxxx

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated