[doc] Re: re still doesn't idle ok
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] Re: re still doesn't idle ok



hi

sorry for that slip up!.
what i need to check now is that all the leads on the connectors
push home fully.
and try to apply the earth by hand  (+ve to middle of motor)
to open /close valve manually and try to get a stable idle.

in other words 'i' replace the ecu.

will also try the screws method and see if she will warm up.

regards

steve

--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski - DMC Ltd
<martin@xxxx> wrote:
>
> It's DMC Ltd now mate :-)
>
> I tested both independently and together on a car during warm-up.
It
> quite happily hunted and revved when started, immediately dropping
to
> idle which remained exactly as I'd expect.
>
> Martin
>
> blackaddertoo wrote:
>
> >i will check the motor with 12v by hand, but Martin at dmuk has
> >already put both motor and ecu on his car and he said it ran
normaly
> >with no problems.
> >
> >Regards
> >
> >Steve
> >
>







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




SPONSORED LINKS
Recreation Automotive Sports
Delorean part Delorean cadillac


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated