Re: [doc] Painting Windscreen Frame - 3 Pieces

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

See my top line again:

"Plasticote Satin black and plasticote metal primer."

Absolutely these must be primed, and only the side ones are ally, the 
top one is stainless. This was a job I did on my own car when it arrived 
in 2001 and now 15,000 miles ago. The only chips in the paint are 1) 
where I dropped a screwdriver on it 5 minutes after re-fitting them 
(grr) and 2) a couple of stone chips at the top centre.

Martin

simonsays10002003 wrote:

>--
>hi i thought these strips were aluminum if this is so the most 
>important thing to remember is to etch primer them first if you dont 
>the paint will just be sticking to the invisible oxidisation and 
>will simply eventualy start to come off it will certainly stone chip 
>really easy you then have todo it all again.dont bodge these cars 
>lads there worth more than that.
>
>- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
>  
>
>>Plasticote Satin black and plasticote metal primer. 
>>







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

SPONSORED LINKS

Recreation	Automotive	Sports
Delorean part	Delorean cadillac

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---