[DML] Pulling Transmission

["Steven L. Alves" <steve@xxxxxxxxxx>]

I am in the middle of pulling the manual transmission to replace the clutch and can not get it out. It feels like it is still attached to the engine. I have the 4 big bolts, 3 at the starter and 2 on top out (trans mounts and linkages are also out with a jack under the tranny). I see mention of two covers on the bottom and driver side but can not find them. Has anyone seen any pictures describing the process? I am looking at the shop manual and see no mention of having to remove a plate prior to dropping the transmission. It does mention a "flywheel protection shield" in step 10 but that is after lowering the transmission. I can't figure out what I am missing. Has anyone seen any photos of the process I can look at or have any ideas what I may be missing?

Thanks
Steve
#2700
 

[Non-text portions of this message have been removed]


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/