Re: [DML] Pulling Transmission

[casey barlow <dmc1288mph@xxxxxxxxx>]

HI,  The covers are why it is not coming out. They are small and kinda hard to see in the car. I can't think of anything else that would keep it from coming out. Hope this helps, Casey

--- On Sun, 5/25/08, Steven L. Alves <steve@xxxxxxxxxx> wrote:
From: Steven L. Alves <steve@xxxxxxxxxx>
Subject: [DML] Pulling Transmission
To: dmcnews@xxxxxxxxxxxxxxx
Date: Sunday, May 25, 2008, 3:11 PM










    
            I am in the middle of pulling the manual transmission to replace the clutch and can not get it out. It feels like it is still attached to the engine. I have the 4 big bolts, 3 at the starter and 2 on top out (trans mounts and linkages are also out with a jack under the tranny). I see mention of two covers on the bottom and driver side but can not find them. Has anyone seen any pictures describing the process? I am looking at the shop manual and see no mention of having to remove a plate prior to dropping the transmission. It does mention a "flywheel protection shield" in step 10 but that is after lowering the transmission. I can't figure out what I am missing. Has anyone seen any photos of the process I can look at or have any ideas what I may be missing?



Thanks

Steve

#2700

 



[Non-text portions of this message have been removed]




      

    
    
	
	 
	
	








	


	
	


      

[Non-text portions of this message have been removed]


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/