RE: [DML] Re: removing oil through the dipstick
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] Re: removing oil through the dipstick
- From: "DarkStar Media" <darkstarmedia@xxxxxxxxxxx>
- Date: Sun, 13 Apr 2008 12:46:22 -0700
I have to disagree with you there... I have found that nylon washers need to
be replaced often. A hint on the copper/aluminum washers is to turn it over
every time you change the oil. I like to replace it whenever I change the
oil if available cause they are cheap.
Richard
-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
DMCVIN6683
Sent: Saturday, April 12, 2008 4:41 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Re: removing oil through the dipstick
I have never changed my Copper washer and it never leaked and I did
plenty of Oil Changes.
Nylon is the way to go, it never needs to be changed.
Mark V
On Apr 11, 2008, at 1:10 PM, Tom Tait wrote:
> As I peer into my stainless steel ball I see...
>
>
>
> "Hey Farrar... I have all kinds of drain plugs for that fit both the
> oil pan and your transmission pan on my specialtauto.com site. We
> have
> magnetic an non magnetic. You also need to change out the sealing
> washer on the plug every time. You will get a new one with any
> plug you
> buy from me and I also include the good puffy washers with every oil
> filter I sell! Come in by the site, you can get a new magnetic plug
> that uses a standard wrench on my Engine Products page...
>
>
>
> John Hervey"
>
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN