Re: [DML] Gear Teeth Question

["content22207" <brobertson@xxxxxxxxxxxx>]

Speedometer magnet is set up for clockwise rotation. You'd need an
intermediate gear to change cable rotation.

Otherwise it "could" be done. A lot of engineering however. You'd
probably need to swap spindles (I doubt the passenger side is hollow).
Cable would be longer, but no longer than a full size domestic. Some
of the bends might get you into trouble though (unless you mounted the
angle drive upside down on the passenger wheel and ran the cable in a
giant U around the front of the car).

I really don't think all that work is the best solution. If screw
gears are directional, perhaps Houston could make their next angle
drive backwards, then add a third gear somewhere to get cable rotation
clockwise again (in a replacement Lambda box perhaps?).

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, Farrar Hudkins <fhudkins@...> wrote:
>
> So have you installed it on the right side? Or is that impossible?
> 
> Farrar Hudkins
> #2613
> 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/