Re: [DML] Pivot Bolts

["Walter Coe" <Whalt@xxxx>]

> I have taken the nuts off the end of the pivot bolts, however they just
won't come out. Does the Split spacer (100481) grip them in any way?

No. I had to remove the bottom pivot bolts when I replaced my shock
absorbers. My experience was that the weight of the assembly hanging tended
to put sheer force on these bolts which made them harder to get out. I
ended up putting a floor jack under the hub carrier to left it up enough to
relieve the tension. Then to put things back together I needed the jack
again to get the holes to line up.

Walt Tampa, FL