[DML] Re: Going keyless (push-button start)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Going keyless (push-button start)
- From: "M. P. Olans" <mpolans@xxxxxxxxxxx>
- Date: Sat, 18 Dec 2004 16:00:05 -0000
Ryan,
That wasn't me, but I did something similar. I hit the car show
circuit pretty hard out here in Arizona and am always looking for
ways to trick things out or just show-off....:) What I did was
purchase an aftermarket Honda S2000 start button from ebay. It comes
with three tops: clear, red, and aqua/teal. It also comes with its
own wiring harness and relay. I chose to route it through the
ignition switch wiring so that when the car was off there would be no
possibility of cranking the starter.
I removed my cigar lighter plug/outlet and set it in there.
I've got other 12V outlets around the car so I wasn't worried about
losing it. Right next to it I put a guarded toggle switch. I routed
the power through the guarded toggle so that the starter button would
only crank the starter when the guarded toggle was armed. That way
some schmoe wouldn't hit the button saying, "What's this?" and either
start my car, make it lurch, or grind the starter if the car was
already running.
Hope this helps. Please feel free to contact me off the list with
any questions.
Matthew
AZ-D VeeP
VIN 16816
--- In dmcnews@xxxxxxxxxxxxxxx, "ryanpwright" <yahoo1@xxxx> wrote:
>
>
> Yes, it's me again.
>
> I recall reading a post many months ago about someone who replaced
his
> ignition key with a push-button start. I specifically recall reading
> that the button fit perfectly in that hole. My questions,
>
> 1. Anyone know who this was?
> 2. Where'd the button come from?
> 3. Do you supply power to the starter directly through the button,
or
> is a relay used (and if so, any special type, or just a standard 12
> volt sealed automotive relay)?
>
> Thank you,
>
> -Ryan
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN