RE: [DML] Re: Going keyless (push-button start)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] Re: Going keyless (push-button start)
- From: "Videobob Moseley" <videobob@xxxxxxxxxxx>
- Date: Sat, 18 Dec 2004 17:56:58 -0600
Can I ask a question,
was the point of doing this just to be unique or because there was something
wrong
with your key ignition?
It seems like a lot of extra work.
Just curious.
- VB
>From: "M. P. Olans" <mpolans@xxxxxxxxxxx>
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx
>Subject: [DML] Re: Going keyless (push-button start)
>Date: Sat, 18 Dec 2004 16:00:05 -0000
>
>
>
>
>Ryan,
> That wasn't me, but I did something similar. I hit the car show
>circuit pretty hard out here in Arizona and am always looking for
>ways to trick things out or just show-off....:) What I did was
>purchase an aftermarket Honda S2000 start button from ebay. It comes
>with three tops: clear, red, and aqua/teal. It also comes with its
>own wiring harness and relay. I chose to route it through the
>ignition switch wiring so that when the car was off there would be no
>possibility of cranking the starter.
> I removed my cigar lighter plug/outlet and set it in there.
>I've got other 12V outlets around the car so I wasn't worried about
>losing it. Right next to it I put a guarded toggle switch. I routed
>the power through the guarded toggle so that the starter button would
>only crank the starter when the guarded toggle was armed. That way
>some schmoe wouldn't hit the button saying, "What's this?" and either
>start my car, make it lurch, or grind the starter if the car was
>already running.
>
>Hope this helps. Please feel free to contact me off the list with
>any questions.
>
>Matthew
>AZ-D VeeP
>VIN 16816
>
<snip>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN