[DML] Re: Centering the air meter plate

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

Loosen the bolt and center the plate. Make sure as it moves it does
not touch the sides of the venturi. It is not supposed to touch the
rubber bumper. That is only there in case of a backfire. The "rest
position" is adjusted by turning the nut next to the hole for the
mixture screw. The plate should be in the center of the venturi at the
smallest point in it's diameter several mm away from the rubber stop.
I hope you did not coat the plate or the venturi. That will affect things.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Matt Spittle" <supermatty@xxxx> wrote:
> 
> 
> I took apart my air venturi to clean it, and that's it!  
> 
> OK, no, I lie.  I also powdercoated it silver.  Everything seems to 
> have gone well, except that now I'm unsure how "centered" the air 
> metering plate is supposed to be.  I realize it's not supposed to 
> (and can't) provide a vacuum seal with the rest of the surrounding 
> assembly.
> 
> Reading the archive, I determined that you can have a "too rich" 
> 








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/