Re: [DMCForum] Removal of Timing Pulley
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Removal of Timing Pulley



Martin Gutkowski wrote:
>
> It's 10mm and like everything else on the engine, Metric.
>


Sorry, I thought you were asking about the timing chain allen key bolts

FWIW Don't mess with the liner seals..They only fail if the liners are 
accidentally lifted, and you have to remove all the pistons to change 
them, and it's not just " seal" - you have to shim the liners to a 
pecific depth using combinations of different thicknesses of seal.

Martin

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/DMCForum/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:DMCForum-digest@xxxxxxxxxxxxxxx 
    mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive