Re: [DMCForum] Center vent actuator arm broken
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Center vent actuator arm broken

In the past I've had them made by a local machine shop out of brass.


Ryan Wright wrote:

> Help!
> The plastic actuator arm for my center vents has broken. The vents
> stopped working several months ago; I discovered the broken arm and
> superglued it back together. This held until yesterday. A second round
> of superglue didn't take, so I pulled the dash out tonight and removed
> the actuator.
> The arm must have broken into a few pieces as there is no way to fit
> it back onto the actuator - there are chunks of plastic gone. Thus, I
> am SOL. I also see that this part is apparently unavailable from DMCH,
> as - if I'm looking at the right thing - the price is $0.00.
> <>
> 2 109128 ACTUATOR 1 $0.00
> What do I do now?! I'll be calling DMCH in the morning but can someone
> advise me on the availability of this part in the meantime?
> -Ryan
> __
> .

[Non-text portions of this message have been removed]

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive