RE: [DMCForum] Center vent actuator arm broken
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Center vent actuator arm broken



I would still bet Josh has one.

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Ryan Wright
Sent: Wednesday, August 02, 2006 12:31 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Center vent actuator arm broken

Ah ha!! Found it!

http://delorean.com/dmcstore/ViewPart.asp?PID=494&QTY=1

Good, they have them. It's safe to ignore my request. :)

-Ryan


On 8/1/06, Ryan Wright <ryanpwright@xxxxxxxxx> wrote:
>
> Uh oh. That's not the part I'm looking at, then.
>
> This is a little round plastic thing. Smaller in diameter than the metal
> ones, but thicker. It's got a plastic arm with a metal end piece that
sticks
> out the bottom, which controls the center vents.
>
> I can't find it on their web site and don't know what the thing is called.
>
> -Ryan
>
>
> On 8/1/06, timnagin <timnagin@xxxxxxxxxxxxxx> wrote:
> >
> >    Number 2...
> >
> > http://delorean.com/dmcstore/ViewPart.asp?PID=2184&QTY=1&popup=true
> >
> > ...is a metal encased diaphragm. Unless the diaphragm ruptures it
> > shouldn't
> > be an issue.
> >
> > The whole assembly is only $34.45 though.
> >
> > http://delorean.com/dmcstore/ViewPart.asp?PID=240&QTY=1&popup=true
> >
> > I bet Josh Haldeman has one.
> >
> > Greg
> >
> >
> > -----Original Message-----
> > From: DMCForum@xxxxxxxxxxxxxxx <DMCForum%40yahoogroups.com>
[mailto:DMCForum@xxxxxxxxxxxxxxx<DMCForum%40yahoogroups.com>]
> > On Behalf
> > Of Ryan Wright
> > Sent: Tuesday, August 01, 2006 11:49 PM
> > To: DMCForum@xxxxxxxxxxxxxxx <DMCForum%40yahoogroups.com>;
> > dmcnews@xxxxxxxxxxxxxxx <dmcnews%40yahoogroups.com>
> > Subject: [DMCForum] Center vent actuator arm broken
> >
> > Help!
> >
> > The plastic actuator arm for my center vents has broken. The vents
> > stopped working several months ago; I discovered the broken arm and
> > superglued it back together. This held until yesterday. A second round
> > of superglue didn't take, so I pulled the dash out tonight and removed
> > the actuator.
> >
> > The arm must have broken into a few pieces as there is no way to fit
> > it back onto the actuator - there are chunks of plastic gone. Thus, I
> > am SOL. I also see that this part is apparently unavailable from DMCH,
> > as - if I'm looking at the right thing - the price is $0.00.
> >
> >
http://delorean.com/dmcstore/ViewDir.asp?PageID=81&PageCat=7%2DHeating%2C+Ve
> >
> > ntilation+and+A%2FC
> > 2 109128 ACTUATOR 1 $0.00
> >
> > What do I do now?! I'll be calling DMCH in the morning but can someone
> > advise me on the availability of this part in the meantime?
> >
> > -Ryan



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated