RE: [DMCForum] Center vent actuator arm broken
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Center vent actuator arm broken

Number 2... a metal encased diaphragm.  Unless the diaphragm ruptures it shouldn't
be an issue.

The whole assembly is only $34.45 though.

I bet Josh Haldeman has one.


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Ryan Wright
Sent: Tuesday, August 01, 2006 11:49 PM
To: DMCForum@xxxxxxxxxxxxxxx; dmcnews@xxxxxxxxxxxxxxx
Subject: [DMCForum] Center vent actuator arm broken


The plastic actuator arm for my center vents has broken. The vents
stopped working several months ago; I discovered the broken arm and
superglued it back together. This held until yesterday. A second round
of superglue didn't take, so I pulled the dash out tonight and removed
the actuator.

The arm must have broken into a few pieces as there is no way to fit
it back onto the actuator - there are chunks of plastic gone. Thus, I
am SOL. I also see that this part is apparently unavailable from DMCH,
as - if I'm looking at the right thing - the price is $0.00.
2 	109128 	ACTUATOR 	1  	$0.00 	

What do I do now?! I'll be calling DMCH in the morning but can someone
advise me on the availability of this part in the meantime?


Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive