RE: [DMCForum] 5 speed parts...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] 5 speed parts...



Got any pictures? :)

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Martin Gutkowski - DMC Ltd
Sent: Saturday, April 22, 2006 12:48 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] 5 speed parts...

#2727's engine got a lick of paint today, I'm still feeling the 
effects.... weeee! Gearshift adapter plate fitted and gearshift 
installed and working after a bit of fettling. Shift related brackets 
and stuff all mounted on the gearbox, slave cylinder and clutch fork 
installed together with TDC sensor. Just got to get the f***ing timing 
gaskets I ordered 3 weeks ago (supplier over here - usual bloke's on 
holiday). Currently thinking of a list of the silly little bits that 
need to come from Houston to complete the auto/manual conversion. Just 
got to buy the ECU and sensors and bish bash bosh, should be ready for a 
drive (normally aspirated) to our rad guy to make up the intercoolers.

Question: If making a short trip with turbos installed but not feeding 
to the intake manifold, shall I just block off the intake ports and 
unhook the wastegates and wire them open?

Martin



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive