Re: [DMCForum] ELECTRICAL STARTING PROBLEMS
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] ELECTRICAL STARTING PROBLEMS



Mike,


I have seen behavior like this from bad battery cables.  On the outside
the cables look fine, but the connection is intermittent.

You can test this when it does not work.  With some one holding the
key(when it is not starting)  in the start position, measure the
voltages from the bat term to the starter and the ground.  Cut a little
hole in the bat cable beyond the connector.

BOB



SPONSORED LINKS
Dmc Dml Dmc fz10
Dmc fz1s Delorean part Dml forte


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive