Re: [DMCForum] ELECTRICAL STARTING PROBLEMS
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] ELECTRICAL STARTING PROBLEMS



Bob,

The negative cable is brand new and I am going to
trouble shoot the positive cable next.  If necessary,
I'll jumper around both and see what happens.

Mike

--- Bob Brandys <BobB@xxxxxxxxxxxxxx> wrote:

> Mike,
>
>
> I have seen behavior like this from bad battery
> cables.  On the outside
> the cables look fine, but the connection is
> intermittent.
>
> You can test this when it does not work.  With some
> one holding the
> key(when it is not starting)  in the start position,
> measure the
> voltages from the bat term to the starter and the
> ground.  Cut a little
> hole in the bat cable beyond the connector.
>
> BOB
>
>



           
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive