[DMCForum] Re: Door lip seals & style differences
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Door lip seals & style differences



Chris,

You wouldn't happen to know exactly what screws I should be looking
for at Lowe's would you?  In the parts manual, the screws are listed
as "N12 screws".  Are those universal?

-Brandon
#4205

--- In DMCForum@xxxxxxxxxxxxxxx, Chris Almy <chris.almy@xxxx> wrote:
> Ryan,
> Are you trying to make the rubber seal line up with the outside SS
lip like
> the original? The later style has the rubber lip about half an inch
inward.
> This provides a better seal. See if you can orientate them like
that. You
> should have the rubber going over the part of the door light. I haven't
> replaced the passenger side, but on my driver's side all 5 screw
holes line
> up and the 2 drain holes.
>
> While your at it, go to Lowe's and buy replacement screws in SS. You
can
> get 10 of them for 2 bucks. It's a nice little touch for an area that's
> really visible with the doors up.
>
> Chris
> VIN 4099




YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated