[DMCForum] Re: A simple task (Anti-Sieze)

["content22207" <brobertson@xxxxxxxxxxxx>]

I suspect your problem isn't the threads (steel on steel) but the
beveled shoulder (steel on aluminum). Try putting it there only and
see what that does for you. To avoid stubborn lug nuts on my Lincoln's
alloy wheels I put some axle grease on the mating surfaces.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote:
> You know, I thought of this a long time ago, but everyone raised 
> hell with me saying it was unsafe and that the torque values would 
> be wrong etc.....
> 
> Screw it. I'm using it now.
> 
> Rich
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@xxxx> wrote:
> > I am now in the habit of using Never-Seize on *EVERY*
> > bolt... Including the lug nuts.
> > 
> > 
> > 
> > --- cruznmd <racuti1@xxxx> wrote:
> > 
> > > Been there done that. 
> > > 
> > > I tighten my lug nuts to the manual spec by hand
> > > with a torque 
> > > wrench. They end up siezed anyway, probably because
> > > the car is 
> > > stored outside (gasp!)
> > > 
> > > 
> > 
> > 
> >             
> > ____________________________________________________
> > Start your day with Yahoo! - make it your home page 
> > http://www.yahoo.com/r/hs

SPONSORED LINKS

De lorean

Delorean part

Delorean cadillac

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---