Re: [DMCForum] locks left/right

[Chris Almy <chris.almy@xxxxxxxxxxx>]

Andrew,
You probably have a burned out solenoid. The Lockzilla would not be a 
problem because a single relay controls the lock power on both doors. You 
can rebuilt the solenoid using these directions:
http://www.dmcnews.com/Techsection/stragand_lock_rewind/Rewinding.htm

I did this and it worked great, but it does take some time rewinding them. 
However, shortly afterwards, my other solenoid gave out too. At that point, 
DPNW's actuator upgrade had came out and I switched over. Works great and 
is easier installing then rewinding both solenoids.

Chris
VIN 4099

At 04:02 PM 4/25/2005 -0500, you wrote:
>Am I reading my electrical diagram correctly?  This is a pretty basic
>thing, but I've never actually known the answer, and I don't find it in
>the archives.  It looks from the diagram that locking/unlocking on
>*either* side should be duplicated on the other.  Is this the expected
>operation?
>
>Having gotten all the mechanical issues with my locks sorted out, I'm now
>running into definite electrical ones.  Locking and unlocking on the
>driver's side is duplicated on the passenger side, but the passenger side
>switch will only unlock (I think it was unlock) the driver's side and will
>not lock it.
>
>I've checked all the relevant electrical connections and everything is
>good now that I've got the doors mechanically working and the wipe
>switches making good connections.  Do I have a dead LockZilla?
>
>-andrew

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.