[DMCForum] cooling fan follow-up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] cooling fan follow-up



First of all, thank you to everyone who posted on this.

I found the problem- melted fuses. I have John Hervey's Fan fix module
in my car, and the inline fuses that are used in the fan-fail connector
actually melted together. The fuses didn't blow, though. I believe this
happened because of the way I had the whole module "tucked" in a small
crevice, and the fuses were side by side. Add that, and running the AC
more than usual with the summer heat and there is a potential scenario
of hot fuses. The wire, fuse holders, and everything else held up, but
those fuses are shot! I replaced them with 15amp fuses (there were
formerly 20amp) and I always keep spares with me, so this should solve
this problem.

Just for the record, the unit is 2 years old, so I'm not saying anything
about the Fan Fix module- it's good stuff. Every part has a life, and
those little fuses had all they could stand of DeLorean voltage.

I also found the 25amp circuit breaker that powers both the door locks
and the RPM relay appears to be shot- the RPM relay wires were very hot
to touch and the connectors were starting to smolder. I guess it's time
to replace all of that 23 year old crap in that compartment..

Thanks again!

Eric
vin 4433


[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor

Get unlimited calls to

U.S./Canada



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated