[DMCForum] Re: Clutch replacement procedure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Clutch replacement procedure



Also.... The clutch kit says the friction surface of the flywheel MUST
(in big bold capital letters) be resurfaced.

Is this so? Or is it more like brake rotors, where it's often claimed
you have to resurface the rotors but if they aren't grooved or
otherwise damaged you don't really have to?

Thanks again,

-Ryan

--- In DMCForum@xxxxxxxxxxxxxxx, "ryanpwright" <yahoo1@xxxx> wrote:
> Hello,
>
> I'm replacing my clutch this afternoon (PJ Grady's complete
> Centerforce clutch kit), and need a basic procedure on how to do it.
> I've never done this before. For that matter, I don't even know
> exactly where the pressure plate, etc, is located, let alone how to
> get to it and what to do once I've got it apart.
>
> Any advice would be greatly appreciated. I'll be replacing the master
> & slave cylinders & clutch line over the next few hours, and the rest
> of the clutch will be done after that.
>
> Thank you,
>
> -Ryan


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated