Re: [DMCForum] Speaker wire polarity?

[DMCVIN6683 <dmcvin6683@xxxxxxxxx>]

Run new wires because the original speaker wires are too small for any 
new speaker or radio.

Mark V



On Wednesday, August 18, 2004, at 02:39  PM, lakelanier20 wrote:

> Thanks for the strut responses.  I decided to go with a set of DMCH
> ones.  Apparently they did fix the length issue:
> http://autos.groups.yahoo.com/group/dmcnews/message/34004
>
> But my new question is, with the Craig radio, does anyone know which
> wire is positive and negative going to the speakers?  It doesn't show
> the polarity in the wiring diagram of the workshop manual.  Going to
> each front speaker are two black wires, and one has a white stripe.
> The one with the white stripe has a wider spade connector than the
> plain black one.  I believe that the wire with the white stripe is
> the positive one.  The new pioneer speakers I have also use the wider
> connector as the positive.  Am I correct about the polarity of the
> original wires?
>
> Thanks,
> -Derek
> VIN 5302
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.