RE: [DMCForum] Re:DeLorean seats and Backs and crawing out of roc ks

[Travis Goodwin <tgoodwin@xxxxxxxxxxxx>]

Either way you'd have to retap. Try retapping the same size to clean out the
threads. If that doesn't work, go one size up. It worked on my exhaust
manifolds.

-----Original Message-----
From: billsfanmd@xxxxxxx [mailto:billsfanmd@xxxxxxx] 
Sent: Thursday, June 24, 2004 1:01 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Re:DeLorean seats and Backs and crawing out of roc
ks

bolt never gets tight...It just starts to spin and barely hold. The bolt 
looks fine but I just cant tell....To be honest I have heard the top pulley
does 
not do much so in an emergency I could take it out and retighten to bottom 
bolts and and add a sapce to compensate for the top missing bracket....

I need to learn how to rethread these things since it seems to be a common 
problem. I need a engine block to practice on before I try. I think Rob uses
a 
threadcert (sp)

Let me know if you a get a second at home  to inspect your bolt...

mike 


[Non-text portions of this message have been removed]




 
Yahoo! Groups Links

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.