Re: [DMCForum] My own fuel problems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] My own fuel problems



Well I hate to break it to you Martin but that is a nasty rumor that the
vendors spread around.  I have had mine apart many times with out any
problems.  It is a thin SS sheet, but it is more than a few microns maybe
the same as a soda can. Which is what 30-40 thou?

The hardest part of the whole process is finding high quality o-ring;s that
fit.  I'm not the only "Non-pro" to do this, my parts supplier used to
rebuild them all the time

If you ever get over to FL I'll show you how I do it.


Andrei

----- Original Message -----
From: "Martin Gutkowski" <webmaster@xxxxxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Monday, March 08, 2004 9:15 PM
Subject: Re: [DMCForum] My own fuel problems


> CPR yes, Metering head, not a chance. They are assembled with precisely
> machined faces in a clean environment and a gasket (aluminium or
> stainless?) a few microns thick. DO NOT OPEN A FUEL DISTRIBUTOR. This is
> one job to leave to the Pros.
>
> Martin
>
> Walter Coe wrote:
>
> > I
> >have heard of people opening up CPR's & fuel distributors
> >and getting them back together without leaks.  -Haven't
> >tried it myself.
> >
> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive