Thought about this after "send" button was already pressed (but that message was long enough anyway): Nowhere did you mention turning CO2 screw to lean fuel mixture back to 5%. Why don't you try that before giving up on non-Lambda experiment. This isn't rocket science: Without Lamda the upper fuel distributor chambers are going to flex to a maximum size and stay there. That's it. That's the whole point -- to remove constant fluctuation of lower chambers by frequency valve. All you have to do then is adjust metering piston movement (with CO2 screw) to correspond to maximum upper chamber volume. Hopefully your family members are NOT lurking. My sister does, so now knows all my sexual predilections. Andrei the ENGINEER... Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, "Andrei Cular" <acular@xxxx> wrote: > > Don't know how old you are, but I am old enough to remember what > > Detroit (and Kenosha!) went through in the 1970's: > > Just turned 25, so I don't remember what they went through. However being > a car nut my whole life, helped my uncle rebuild an AMX when I was 5, I am > familiar with the history. > > When a manufacture has something that works they are very slow to change it. > To get the full investment out of a design they usually will just start > bolting things on and making small tweaks till it is no longer possible to > get anymore from the engine. Look at Porsche it tool them nearly 50 years > to switch from air cooled to water cooling in the 911. > > > I am honest to goodness curious about your test results. Please post > > to Forum (am away from eMail until Sunday). This isn't a "he said/he > > said" issue -- I really think you can come up with some hard data that > > *SOME* owners will find useful (surely I am not the *ONLY* person who > > wants to return to basics). > > I'll keep you updated. > > > Andrei the scientist... > I'm and engineer not a scientist. Sorry had to just incase any family > members are monitoring this group. > > > Andrei _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ * To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN