I did this operation last year, and you can (and need to) do all the hog rings from the BACK... and I did it without hog ring pliers!! For those flaps (like the 2 in the headrest) You need to push the flaps though the foam to the back. The foam on the back of the headrest will need to be cut slightly so it can be pulled off the metal frame. -----Original Message----- From: silverdelorean2002 [mailto:silvercrw646@xxxxxx] Sent: Thursday, May 01, 2003 4:33 PM To: DMCForum@xxxxxxxxxxxxxxx Subject: [DMCForum] Hog Ringing new seats Hey guys i have bought some new delorean NOs Leather seat covers. I am trying to install them but have run into a confusing part. Anyone have any basic instructions on doing it. It seems that some of the rings can be put in from the back and some cannot such as the ones on the seat bottom. You cant access it from the back and also the headrest. There are two flaps there but only can access it through the front. I have the hog ring pliers too but it seems very hard to get the ones from the front in. anyhelp? thanks jon 10103 Yahoo! Groups Sponsor <http://rd.yahoo.com/M=249982.3179269.4495679.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/*http://hits.411web.com/cgi-bin/autoredir?camp=556&l ineid=3179269?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=249982.3179269.4495679.1261774/D=egroupm ail/S=:HM/A=1524963/rand=334836714> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN