Re: [DMCForum] Re: Isolating a DeLo Automatic Before Dollying
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Isolating a DeLo Automatic Before Dollying



Simple they are me and are too lazy or just too stupid to know that you can
remove the drive shaft or do it bother you.


Andrei



----- Original Message -----
From: "content22207" <brobertson@xxxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Tuesday, January 13, 2004 3:05 PM
Subject: [DMCForum] Re: Isolating a DeLo Automatic Before Dollying


> If a DeLo automatic transmission is anything like every other
> manufacturer's I've ever encountered, it will need to be isolated
> before DOLLYING (not trailering). But without a driveshaft to the rear
> wheels I'm not sure exactly how one goes about it. Removing the drive
> axles makes sense, but I am NOT claiming to be even remotely
> knowledgeable for sure. Hence the question marks.
>
> Plastic bag reference was for front engine RWD cars. Up on the dolly
> transmission fluid will run out. And yes, dirt can get in.
>
> I simply don't understand why some people dolly cars backwards rather
> than remove the drive shaft.
>
> Bill Robertson
> #5939
>
> >--- In DMCForum@xxxxxxxxxxxxxxx, "Andrei Cular" <andreic@xxxx> wrote:
> > Bill are you still talking about a DeLorean?    I believe the half
> shafts
> > are held on with 8 bolts per CV.  and you don't have to worry about
> fluid
> > leaking out of the CV joints, just dirt getting in.
> >
> >
> >
> > Andrei
> >
> >
> >
> > ----- Original Message -----
> > From: "content22207" <brobertson@xxxx>
> > To: <DMCForum@xxxxxxxxxxxxxxx>
> > Sent: Tuesday, January 13, 2004 12:12 PM
> > Subject: [DMCForum] Re: Continued Farrar Towing His New DeLo
> >
> >
> > > When I mentioned towing the car backwards, I was envisioning it backed
> > > on a DOLLY, not a trailer. So many replies have misunderstood, I must
> > > not have been clear. Apologies.
> > >
> > > Some people claim you can dolly a car backwards to keep from removing
> > > the driveshaft. Personally don't see what the big deal is -- normal
> > > shafts are only held on by 4 bolts. Simply tape or rubber band a
> > > plastic bag over the transmission yoke to keep the fluid from
> falling out.
> > >
> > > The question is: if Farrar dollys a DeLo automatic, how do you isolate
> > > THAT transmission? Do you simply pop the drive axles off?
> > >
> > > Of course you don't need to isolate the transmission if the car's on a
> > > flat bed.
> > >
> > > Nor do you need to isolate a manual transmission on a dolly.
> > >
> > > Bill Robertson
> > > #5939
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
>
> To unsubscribe from this group, send an email to:
>  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>
> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
>
>
>



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive