Re: [DML] Re: Carbon fiber louvers - New SS frame
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Carbon fiber louvers - New SS frame



This content is currently unavailable

Can you verify the link please.

Tom

--------------------------------------------------
From: "content22207" <brobertson@xxxxxxxxxxxx>
Sent: Tuesday, December 27, 2011 4:30 PM
To: <dmcnews@xxxxxxxxxxxxxxx>
Subject: [DML] Re: Carbon fiber louvers - New SS frame

> I have long advocated double wishbones up front, but am often rebuffed by 
> owners who claim a floppier LCA is just fine (not only does the sway bar 
> do a poor job of doubling as a backwards thrust arm, but the LCA itself is 
> skinniest at the pivot point which is inherently unstable, kind of like 
> standing with your legs together versus standing with them spread apart. 
> OEM LCA's are also made of 16 gauge steel, which makes them rather twisty 
> themselves).
>
> Earlier this year I installed a set of Ed Uding's LCA brackets on a pair 
> of 1/8" alloy steel arms, creating pseudo lower wishbones. The result 
> revolutionized the car: 
> http://www.facebook.com/media/set/?set=a.267044360007488.68655.100001057778755&type=3
>
> Bill Robertson
> #5939
>
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "Tom Niemczewski" <dmctom@...> wrote:
>>
>> Hi Bill,
>>
>> The front suspension will use double wishbones with coil-over-shock and 
>> will
>> be fully adjustable. That is the easy part. The real pain is with the 
>> rear.
>> It will also use double wishbone system and I'm getting rid of the TABs.
>> Major changes...
>>
>>
>> Greetings from Poland!
>> Tom Niemczewski
>> Vin 6149 plus 2418, 3633, 5030, 16473, 17086
>> Google earth: 52°25'17.66"N, 21° 1'58.40"E
>>
>> --------------------------------------------------
>> From: "content22207" <brobertson@...>
>> Sent: Monday, December 26, 2011 8:17 PM
>> To: <dmcnews@xxxxxxxxxxxxxxx>
>> Subject: [DML] Re: Carbon fiber louvers - New SS frame
>>
>> > What changes are you making to the front suspension?
>> >
>> > Bill Robertson
>> > #5939
>> >
>> > --- In dmcnews@xxxxxxxxxxxxxxx, "Tom Niemczewski" <dmctom@> wrote:
>> >>
>> >> Hi Matt,
>> >>
>> >> Still not ready. Lots of things going on at once... life... Besides, I 
>> >> do
>> >> not want to rush things. There are some major changes in the 
>> >> suspension
>> >> and
>> >> I want to be absolutely sure everything works before I say that the 
>> >> frame
>> >> is
>> >> ready. That means testing, testing, and then some more testing.
>> >> I will be posting to the DML (regardless if it's moderated or not). I
>> >> will
>> >> post some pictures of the testing and assembly. Can't say exactly when
>> >> but
>> >> I'm still here and still working on the details.
>> >>
>> >> Greetings from Poland!
>> >> Tom Niemczewski
>> >> Vin 6149 plus 2418, 3633, 5030, 16473, 17086
>> >> Google earth: 52°25'17.66"N, 21° 1'58.40"E
>> >>
>> >> --------------------------------------------------
>> >> From: "Matthew" <matthew.spittle@>
>> >> Sent: Sunday, December 25, 2011 6:04 PM
>> >> To: <dmcnews@xxxxxxxxxxxxxxx>
>> >> Subject: [DML] Re: Carbon fiber louvers - New SS frame
>> >>
>> >> > Tom,
>> >> >
>> >> > Any update on your frames?  I would like to buy one.
>> >> >
>> >> > Thanks,
>> >> >
>> >> > Matt
>> >> > #1604
>> >> >
>> >> >
>> >> > --- In dmcnews@xxxxxxxxxxxxxxx, "Tom Niemczewski" <dmctom@> wrote:
>> >> >>
>> >> >> Hello Bryan,
>> >> >>
>> >> >> I'm glad that you are interested in my little project to make a new
>> >> >> frame.
>> >> >> You didn't miss any updates as there weren't any. Life got in a way
>> >> >> and I
>> >> >> had to postpone this project. I'm getting ready to return to it 
>> >> >> just
>> >> >> now
>> >> >> and
>> >> >> I should have the frame finished pretty soon. The frame itself is
>> >> >> pretty
>> >> >> much complete but I'm still working on some parts of it. The good
>> >> >> thing
>> >> >> is
>> >> >> that while I was doing other things in life I had some specialists 
>> >> >> go
>> >> >> over
>> >> >> the frame and do some calculations. Thanks to their effort and
>> >> >> expertise
>> >> >> the
>> >> >> suspension will be redesigned both front and rear. We are doing 
>> >> >> double
>> >> >> wishbone front and are getting rid of the infamous TAB in the rear. 
>> >> >> We
>> >> >> should have the prototype frame on the road within a few months.
>> >> >> Bryan, I didn't want to compete with your frame so the delay was
>> >> >> useful
>> >> >> in
>> >> >> two ways. I've heard that you might be discontinuing your frame 
>> >> >> soon
>> >> >> and
>> >> >> so
>> >> >> I can offer my frames then. Is that true or was it just a rumor?
>> >> >> BTW, one of the reasons for my delay is now listed in my signature.
>> >> >> There's
>> >> >> five of them actually. ;)
>> >> >>
>> >> >> Take care
>> >> >>
>> >> >> Greetings from Poland!
>> >> >> Tom Niemczewski
>> >> >> Vin 6149 plus 2418, 3633, 5030, 16473, 17086
>> >> >> Google earth: 52°25'17.66"N, 21° 1'58.40"E
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> > ------------------------------------
>> >> >
>> >> > To address comments privately to the moderating team, please 
>> >> > address:
>> >> > moderators@
>> >> >
>> >> > For more info on the list, tech articles, cars for sale see
>> >> > www.dmcnews.com
>> >> >
>> >> > To search the archives or view files, log in at
>> >> > http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
>> >> >
>> >> >
>> >> >
>> >> >
>> >>
>> >
>> >
>> >
>> >
>> > ------------------------------------
>> >
>> > To address comments privately to the moderating team, please address:
>> > moderators@...
>> >
>> > For more info on the list, tech articles, cars for sale see
>> > www.dmcnews.com
>> >
>> > To search the archives or view files, log in at
>> > http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
>> >
>> >
>> >
>> >
>>
>
>
>
>
> ------------------------------------
>
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
>
> For more info on the list, tech articles, cars for sale see 
> www.dmcnews.com
>
> To search the archives or view files, log in at 
> http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
>
>
>
> 


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated