[DML] Re: Mounting rear bezel (license plate holder)...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Mounting rear bezel (license plate holder)...

There should be threaded jack-nuts (part 108937A)in place in the fascia. The correct screws are PN 108938. If the facia is too stripped out for the right ones to grab, you can use 3/16" molly bolts in a pinch. 

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, "formula969" <formula969@...> wrote:
> Here's a dumb problem...
> 3 of the 4 screws that hold the rear bezel in place are pretty much just sitting there due to gravity.  The fourth screw seems to be holding onto something, and that one guy is responsible for holding the whole thing on.  I'm afraid that one day the whole thing might flop off and my license plate will be left on the road somewhere!
> How should I go about fixing the stripped holes?  Are there some anchors or something in there that have fallen out?  The screws in place now look to be rusted drywall screws... I'd also like to use something a little more classy than rusted drywall screws.  
> Any suggestions?
> -Ryan


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive