Re: [DML] Mounting rear bezel (license plate holder)...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Mounting rear bezel (license plate holder)...

My suggestion is longer bolts, fender washers, and nuts. They are all
available in stainless, too. :-)

Farrar Hudkins

On Thu, Nov 12, 2009 at 3:02 PM, formula969 <formula969@xxxxxxxxx> wrote:

> Here's a dumb problem...
> 3 of the 4 screws that hold the rear bezel in place are pretty much just
> sitting there due to gravity. The fourth screw seems to be holding onto
> something, and that one guy is responsible for holding the whole thing on.
> I'm afraid that one day the whole thing might flop off and my license plate
> will be left on the road somewhere!
> How should I go about fixing the stripped holes? Are there some anchors or
> something in there that have fallen out? The screws in place now look to be
> rusted drywall screws... I'd also like to use something a little more classy
> than rusted drywall screws.
> Any suggestions?
> -Ryan

[Non-text portions of this message have been removed]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive